The post What Is The Labor Cost To Install Kitchen Cabinets? appeared first on Urban Customs.

The post How To Deep Clean Hardwood Floors appeared first on Urban Customs.

The post How Much Does Kitchen Cabinet Refacing Cost? appeared first on Urban Customs.

The post How To Refinish Bamboo Floors appeared first on Urban Customs.

The post What Is Kitchen Cabinet Refacing? appeared first on Urban Customs.

Hardwood floors are classic. Over time they lose some of their sparkle: scratches, dull finish, maybe some discoloration from sunlight or spills. Refinishing can breathe new life into your floors. But what should you expect to pay in 2025? Read on to learn more.

What’s the Typical Price Tag

• Nationwide, refinishing hardwood floors generally runs $3 to $8 per square foot for a full sanding + stain/finish job. weles.us+3 Angi+3 Hudson Valley Hardwood Flooring+3

• Most pay  between $1,104 and $2,673 when refinishing a single room, with the average being around $1,800–$2,000. Angi+2 Thumbtack+2

• For larger areas (say a whole house with 1,000 sq ft of hardwood), expect totals in the $3,000 to $6,000 range, often more depending on labor, repairs, and choice of finish. weles.us+3 OC Flooring+3 NerdWallet+3

What Drives the Cost: Key Factors

Here are the things that make the price go up or down:

1. Square Footage
   The bigger the area, the more materials and labor. Small rooms often cost more per sq ft because of edges, tight corners, etc. Thumbtack+2 Angi+2

2. Condition of the Existing Floor
   If your floors are in decent shape (only minor wear), the job is simpler. But deep gouges, stains, warped boards, cupping, or water damage require extra prep work, board replacement, or subfloor repair. All that adds labor & materials. Hallmark Floors+2 Angi+2

3. Type of Wood
   Common woods like oak or cherry are less expensive to sand and finish than harder or exotic woods (e.g. mahogany, Brazilian cherry), which may need special tools, sanding, and finishing. Engineered woods can be refinished, but often with more restrictions. Angi+2 Hudson Valley Hardwood Flooring+2

4. Finish + Stain Choices
   Do you want to change the stain/color, or stick with what’s there? How many coats of top coat? Oil-based, water-based, or eco/low-VOC finishes? These choices affect both material cost and labor/time. Custom stains and higher-end finishes cost more. Angi+2 Hudson Valley Hardwood Flooring+2

5. Additional Services
   Things like moving furniture, removing carpet or baseboards, stairs or landings (hand-work), dust containment (“dustless” sanding), cleanup — these extras add up. Hudson Valley Hardwood Flooring+3 OC Flooring+3 Angi+3

6. Labor Costs & Location
   Labor is typically the biggest part of the bill — often 80% or more of the project cost. In high-cost regions (urban, high wage areas) finishing costs are higher. Also, if the layout is complex (lots of edges, stairs, irregular shapes), expect more labor hours. Angi+2 weles.us+2

A Few Local Examples / Higher-Cost Areas

• In Boston, refinishing tends to run $4 to $9 per sq ft due to higher labor/material costs. A full home job there can easily reach $3,500–$6,500 for moderately sized houses. weles.us

• In the Seattle area, many floor-refinishing contractors quote $4.00–$6.00 per sq ft as base rate, with stain add-ons, stairs, and dust containment adding up. OC Flooring

Is It Worth It?

Refinishing costs substantially less than replacing the floor, especially if the subfloor is sound, and the finish can dramatically improve appearance, value, and durability of your home. It’s especially good if you want that super clean, cohesive look across rooms. And when done well, refinished hardwood floors can last many years before needing another touch-up.

Tips to Stretch Your Budget

• Get multiple quotes from trusted local pros. Ask for itemized pricing (labor, material, finish, repair, etc.)

• Prep the space yourself: move furniture, clear clutter, clean well. That reduces labor time.

• Choose simpler finishes and avoid overly custom stains unless really needed.

• Limit refinishing to high-traffic areas first if budget is tight.

• Ask about “dust containment” or “low VOC” options — sometimes the extra cost is worth it for comfort and health.

What to Expect Time-Wise

A typical refinishing job takes 3-5 days: sanding, possible repairs, staining (if chosen), finishing coats, drying/curing. Some finishes dry quicker than others; water-based finishes tend to dry faster, have lower odor, though sometimes cost more. The Spruce+2Hallmark Floors+2

Bottom Line

If you’re planning to refinish hardwood floors in 2025, expect to pay $3-$8 per square foot, with average homes spending $1,500-$4,000 depending on size and condition. For large or premium jobs, it can be more. But with some smart planning—choices about finish, stain, and repair—you can restore your floors without breaking the bank.

Urban Customs Offers Hardwood Floor Refinishing in Phoenix

Our hardwood floor refinishing contractors offer professional and affordable hardwood floor repair and hardwood floor refinishing in the Phoenix Metro area and surrounding cities. Our hardwood floor refinishing service area includes Phoenix, Glendale, Peoria, Gilbert, and more. Receive a free wood floor refinishing quote in Phoenix by giving Urban Customs a call today at 480-747-2516.[/vc_column_text][/vc_column][/vc_row]

The post Hardwood Floor Refinishing Costs 2025 appeared first on Urban Customs.

Step-by-Step: How to Renovate a Kitchen Table

1. Assess the Table’s Condition

Ask yourself:

• Is the table solid wood, veneer, or laminate?

• Are there scratches, stains, wobble, or missing parts?

• Is the issue cosmetic or structural?

Solid wood is easiest to refinish. Veneer needs care. Laminate may be best painted.

2. Clean It Thoroughly

• Use warm water and mild dish soap to remove grease and grime.

• For sticky residue: Use diluted vinegar or mineral spirits.

3. Sand the Surface (If Wood or Veneer)

• Start with medium-grit sandpaper (80–120 grit).

• Finish with fine-grit (220 grit) for smoothness.

• Use an orbital sander for large flat surfaces and hand-sand details and legs.

Avoid sanding too deep on veneer—use a light touch.

4. Choose a Finish Option

Refinishing with Stain (for wood)

• Apply wood conditioner first (optional but helps even stain).

• Use a gel or oil-based stain in your chosen color.

• Wipe excess and let dry between coats.

• Finish with polyurethane or water-based topcoat.

Painting (for laminate or wood)

• Apply primer (Bonding primer for laminate).

• Paint with furniture-grade latex or enamel paint.

• Add a protective topcoat (polycrylic for light colors, polyurethane for dark).

5. Repair Any Damage

• Tighten loose screws or joints.

• Fill gouges or cracks with wood filler, then sand smooth.

• Replace or re-glue wobbly legs.

6. Upgrade the Look (Optional)

• Swap out legs for a modern base (metal hairpins or farmhouse X-style).

• Add a stenciled or painted design or inlay on the top.

• Refinish chairs or add new cushions for a full dining refresh.

Timeline:

• 1–2 days for sanding, staining, and sealing

• Add 1 day for paint or detail work

• Drying time between coats can vary (2–12 hrs depending on finish)

Pro Tips:

• Use a tack cloth to remove dust before finishing.

• Let finishes cure fully before heavy use (up to 7 days).

• Consider food-safe sealers if it will be used for direct food prep.

[/vc_column_text][/vc_column][/vc_row]

The post Renovating A Kitchen Table appeared first on Urban Customs.

Natural Stone Flooring Cost Overview (2025)

Labor alone typically costs $5 – $10 per sq. ft. depending on the complexity (e.g., tile size, sealing, subfloor work).

Total Project Estimate (Example Rooms)

What Affects Cost

• Tile size and pattern complexity

• Subfloor condition (leveling, moisture barrier)

• Sealing requirements

• Accessibility of job site

• Custom edging, inlays, or medallions

Pros of Natural Stone Flooring

• High-end appearance and feel

• Long lifespan with proper care

• Increases home resale value

• Natural variation—no two tiles are the same

Cons

• Can be cold underfoot

• Requires sealing (especially marble, limestone)

• Slippery when wet (some finishes)

• Expensive repairs if cracked or chipped

Stone Floors in Arizona

Arizona’s hot, dry climate and significant temperature swings (especially outdoors) make some natural stones better choices than others for both indoor and outdoor applications. Here are the best-performing options based on durability, heat resistance, and maintenance needs:

Top Natural Stone Flooring Options for Arizona

1. Travertine

• Best for: Outdoor patios, pool decks, and interior floors

• Why it’s great:

  • Naturally porous → stays cool underfoot, ideal for sun exposure

  • Textured finishes available (tumbled, honed) → slip-resistant

  • Blends beautifully with desert architecture

• Maintenance: Needs sealing every 1–2 years to prevent staining

• Cost Installed: $10–$18/sq. ft.

2. Slate

• Best for: Indoor floors, covered patios, kitchens, bathrooms

• Why it’s great:

  • Textured and slip-resistant

  • Withstands high heat and cold well

  • Deep, earthy colors complement desert palettes

• Maintenance: Seal every 2–3 years, especially if used in wet areas

• Cost Installed: $10–$22/sq. ft.

3. Limestone

• Best for: Indoors only (living rooms, hallways, bedrooms)

• Why it’s great:

  • Soft, neutral color tones pair well with Arizona aesthetics

  • Comfortable underfoot and naturally cool

• Maintenance: Softer than travertine—prone to scratching and staining, needs regular sealing

• Cost Installed: $12–$24/sq. ft.

Use With Caution or Avoid

Climate-Smart Stone Tips

• Use a matte or honed finish to reduce heat retention and improve slip resistance.

• Sealing is critical due to desert dust, sand, and hard water staining risk.

• Light-colored stones reflect heat better than dark stones in outdoor spaces.

• Consider radiant floor heating if installing stone indoors—Arizona winters can get chilly at night.

Considering Stone Flooring Installation In Phoenix, Arizona?

Urban Customs is Phoenix, Arizona’s premier natural stone flooring installer with the experience and knowledge necessary to make your flooring installation a breeze. Check out our flooring installation services. Contact us today to speak to one of our flooring experts and find which natural stone tile will work best for your project.[/vc_column_text][/vc_column][/vc_row]

The post Nature Stone Flooring Prices 2025 appeared first on Urban Customs.

1. Sustainable and Eco-Friendly Materials

Sustainability remains a key focus, with homeowners opting for eco-friendly materials and energy-efficient appliances. Recycled materials and smart technologies that conserve energy and water are becoming standard in modern kitchens .​

2. Warm and Earthy Color Palettes

Warm tones like terracotta, ochre, and deep greens are making a comeback, often paired with natural wood finishes to create a cozy and grounded atmosphere .​

3. Innovative Lighting Solutions

Unique lighting fixtures are gaining popularity, with designers incorporating materials such as colored glass, thick metals, and even natural elements like rope and fabric to add character to kitchen spaces

4. Smart Storage and Hidden Appliances

Functionality is enhanced through smart storage solutions and concealed appliances. Features like prep kitchens and hidden storage areas help maintain a clean and organized look while maximizing efficiency .​

5. Mixed Materials and Textures

Combining different materials and textures adds depth and personality to kitchens. Mixing wood with metal accents or incorporating various tile patterns can create a visually engaging space

6. Statement Islands and Central Features

Oversized kitchen islands serve as focal points, offering additional workspace and storage. In some designs, central tables or unique layouts transform traditional kitchen spaces into multifunctional areas .

7. Curved and Organic Shapes

Inspired by Italian design trends, curved countertops and organic shapes are being introduced to soften the kitchen’s appearance and create a more inviting environment .​

8. Plaster Range Hoods

Replacing the once-popular stainless steel, plaster range hoods are now favored for their ability to add a touch of elegance and a custom look to kitchens .​

9. Two-Tone Cabinetry

Two-tone cabinets continue to be a popular choice, allowing homeowners to experiment with color combinations and add visual interest to their kitchens .

10. Maximizing Natural Light

Designs are increasingly focusing on maximizing natural light through larger windows and skylights, creating bright and energy-efficient kitchen spaces .

These trends reflect a shift towards kitchens that are not only functional but also personalized and environmentally conscious.

If you are searching for “Kitchen Remodeling Near Me“, “Kitchen Remodeling Companies“, “Kitchen Remodeling Contractors Near Me“, or “Kitchen Remodeling Phoenix Arizona“, Urban Customs can help!

Our kitchen remodeling contractors service the entire Phoenix Valley Area, including Phoenix, Gilbert, Glendale, Peoria or anywhere else in the Valley of the Sun. Give us a call today at 480-747-2516 for a kitchen remodeling estimate.[/vc_column_text][/vc_column][/vc_row]

The post Kitchen Remodel Trends 2025 appeared first on Urban Customs.

1. Luxury Vinyl Plank (LVP) & Luxury Vinyl Tile (LVT)

• Pros: Waterproof, highly durable, easy maintenance, affordable, looks like wood or stone.

• Cons: May feel less natural underfoot.

• Cost: $2–$5 per sq. ft. (materials), $1.50–$3 for installation.

2. Porcelain or Ceramic Tile

• Pros: Extremely durable, water-resistant, wide style variety.

• Cons: Can be cold and hard, grout maintenance required.

• Cost: $3–$10 per sq. ft. (materials), $5–$10 for installation.

3. Engineered Hardwood

• Pros: Looks like real wood, more moisture-resistant than solid wood.

• Cons: Not completely waterproof, may scratch.

• Cost: $4–$9 per sq. ft. (materials), $3–$8 for installation.

4. Laminate Flooring

• Pros: Budget-friendly, easy installation, good wear resistance.

• Cons: Vulnerable to water damage, doesn’t add as much resale value.

• Cost: $1–$4 per sq. ft. (materials), $1.50–$3 for installation.

5. Waterproof Laminate / Hybrid Flooring (2025 Trend)

• Pros: Combines durability and water resistance, stylish.

• Cons: Pricier than standard laminate.

• Cost: $3–$6 per sq. ft. (materials), $2–$4 for installation.

6. Natural Stone (Slate, Marble, Travertine)

• Pros: Elegant, long-lasting, high resale value.

• Cons: Expensive, requires sealing, can be slippery.

• Cost: $6–$15 per sq. ft. (materials), $6–$10 for installation.

7. Bamboo Flooring

• Pros: Eco-friendly, stylish, durable.

• Cons: Sensitive to humidity changes.

• Cost: $3–$7 per sq. ft. (materials), $2–$4 for installation.

8. Cork Flooring

• Pros: Soft, warm, eco-friendly, great for standing.

• Cons: Not ideal for wet areas, fades in sunlight.

• Cost: $3–$6 per sq. ft. (materials), $2–$4 for installation.

Choosing Based on Needs

• High-traffic kitchens: Porcelain tile or LVP.

• Eco-conscious buyers: Bamboo or cork.

• Budget remodels: Laminate or LVP.

• Luxury look: Engineered hardwood or natural stone.

Urban Customs Is A Flooring Installer In Phoenix, Arizona

Urban Customs offers all types of flooring installation in Phoenix, Arizona, including: Wood flooring, stone flooring, and bamboo flooring. Request a free flooring installation quote from Urban Customs to get started with your flooring installation project today.[/vc_column_text][/vc_column][/vc_row]

The post Flooring Types For Your Home or Kitchen 2025 – Urban Customs appeared first on Urban Customs.