How To Clean Laminate Floors Without Leaving A Film
Yes, it is certainly possible to thoroughly clean laminate floors without leaving a film! Just follow our step-by-step guide below.
Supplies Needed To Clean Laminate Floors
You will need all of the following supplies to properly clean your laminate floors:
- Vacuum cleaner with a soft roller.
- Floor mop featuring microfiber pads.
- PU sealer solution.
- Cleaning solution.
- Cross linker for the PU sealer.
- Small container for mixing solutions.
- Paint brush with soft bristles.
- Microfiber paint roller.
Step 1. Vacuum The Floor
- Begin this process by simply cleaning the floor with a vacuum cleaner.
- A vacuum with a soft roller is best for these delicate laminate floors.
- Attach the soft roller and turn on the vacuum to start cleaning.
- Move backward from one end of the floor to the other, making sure to not step on cleaned areas.
- Completely remove any dust/debris from the flooring.
Step 2. Mop The Floor
- Add cleaning solution to the water tank on the spray mop.
- Dilute the solution with a small amount of water depending on the model you are using.
- Add two and half cups of rubbing alcohol to help the liquid dry quickly.
- Mop the floor by following the same patterns you previously vacuumed.
- Avoid stepping in any mopped areas.
- Press the spray handle to apply the cleaning solution periodically.
- Let the floor dry out for a few minutes before moving on to the next step.
Step 3. Apply PU Sealer
- Once the floor is both clean and dry, you can mix the cross linker with the PU sealer solution.
- Pour them into one container and mix the substances with a proper ratio.
- Apply the solution to the floor edges with a soft-bristle paint brush.
- Dip and brush the PU sealer over the edges, keeping only a thin layer of the PU solution.
- Pour out a certain amount of PU sealer and apply it with a paint roller.
- Coat the entire flooring surface.
- Let the floor dry for at least 2 hours.
- You can apply an additional layer of coating once it has dried completely.
Step 4. Always Take Care Of The Floor
- Taking care of the floor at all times is the last yet most important step.
- Avoid walking on these floors with hard shoes and heels, if possible.
- Clean the flooring regularly with water.
- Mop the flooring daily.
Urban Customs Installs Hardwood Flooring In Phoenix, Arizona
At Urban Customs we offer all types of flooring installation in Phoenix, Arizona, including Wood flooring, stone flooring, and bamboo flooring. Request a free flooring installation quote from Urban Customs today! Our address is 8050 N 19th Ave #127, Phoenix, AZ 85021.
0