Cleaning Wood Floors
Written by Craig B

Cleaning Wood Floors

Wood floors are very popular in businesses and homes. Read on to learn more about keeping them looking great.

Sweep or Vacuum Daily

Sweep or vacuum daily to remove grit and crumbs that can cause scratches and wear down the finish of the floor. Don’t forget to clean under area rugs on a regular basis.

Tackle Messes as They Happen

Don’t allow any type of dry mess or wet spills that can leave water rings to remain for more than a few minutes on hardwood floors. This is especially important
for mud or any foods or liquids that are dark in color and can leave difficult-to-remove stains. After cleaning up the spill with a paper towel or cloth, give the floor a final “rinse” with a slightly water-dampened cloth or mop. Wipe in the direction of the wood grain to prevent streaking.

Dust And Mop Weekly

To capture the dust bunnies that seem to appear from nowhere, dust mop wood floors at least once per week.

Damp Mop Seasonally

If you have been taking care of messes promptly and keeping floors free of grit and dust, then you should only need to damp mop with a cleaning product a few times each year. NEVER use a sopping-wet mop. Excessive water can damage every sealant on wood floors and cause them to buckle. Lightly dampen a microfiber mop and always clean following the grain of the wood and allow the wood to dry completely before walking to prevent spotting. If you live in an area with hard water, damp mop with distilled water. The excessive minerals in hard water can leave the floor finishes looking dull. If you choose to use a commercial wood floor cleaner, choose one with a spray applicator or a mop that includes a refillable spray feature. Just a heavy mist of about one-half teaspoon per two square feet is adequate for cleaning. Too much product can leave floors sticky and actually attract more dirt.

Urban Customs Installs Hardwood Flooring In Phoenix, Arizona

At Urban Customs we offer all types of flooring installation in Phoenix, Arizona, including Wood flooring, stone flooring, and bamboo flooring. Request a free flooring installation quote from Urban Customs today! Our address is 8050 N 19th Ave #127, Phoenix, AZ 85021.

Written by Craig B

Refinishing Hardwood Floors Costs 2024

Refinishing hardwood floors can significantly enhance the beauty and value of your home, but the cost can vary depending on several factors.

Average Cost:

  • Per square foot: The typical range is $3 to $8 per square foot, with an average of $5 per square foot.
  • Total project cost: For a typical 1,000-square-foot floor, expect to pay around $3,000 to $8,000, with an average of $5,000.

Factors Affecting Cost:

  • Size of the area: Larger floor areas naturally cost more due to increased material and labor requirements.
  • Condition of the floors: Heavily damaged floors requiring extensive repairs will be more expensive to refinish than floors in good condition.
  • Type of wood: More exotic or rare wood species may cost more to refinish due to the cost of materials and specialized skills needed.
  • Refinishing method: Dustless refinishing methods offer a cleaner experience but typically cost 20-30% more than traditional methods.
  • Number of coats of finish: Applying additional coats of finish for higher durability or sheen will increase the cost.
  • Labor costs: Hourly rates for refinishing professionals can vary depending on location and experience.
  • Location: Costs tend to be higher in urban areas compared to rural areas.

Additional Costs:

  • Moving furniture: You may need to hire movers to clear the room before and after the refinishing process.
  • Stain and finish: Different types and brands of stain and finish can vary in price.
  • Repairs: Extensive repairs like fixing cracks, gaps, or water damage will add to the total cost.

Saving Money Tips:

  • Get multiple quotes: Compare prices from several qualified refinishing professionals before making a decision.
  • Negotiate the price: Don’t be afraid to negotiate, especially if you have a large project or are getting other services done at the same time.
  • DIY (optional): If you’re handy and the refinishing process seems manageable, you can tackle it yourself to save on labor costs. However, be prepared for the time commitment and potential challenges.
  • Choose less expensive finishes: Opting for standard stains and finishes instead of exotic or high-gloss options can save money.
  • Do some prep work yourself: Removing furniture and baseboards yourself can reduce labor costs.

Remember: Refinishing hardwood floors is an investment that can significantly increase the value and lifespan of your floors. Choosing the right contractor, considering all factors, and planning accordingly can help you navigate the costs and achieve beautiful results within your budget.

Popular Hardwood Floor Materials

  • Oak: The undisputed king of hardwood floors, oak is prized for its durability, beautiful grain patterns, and versatility. It comes in red and white varieties, each offering slightly different looks and properties. Oak is generally available at moderate prices and takes stains well, making it suitable for various design styles.
  • Maple: Renowned for its smooth, light-colored appearance and exceptional hardness, maple is a top choice for high-traffic areas. It’s naturally light but can be stained darker for a different look. However, maple can be more susceptible to scratches and dents compared to other options.
  • Cherry: Offering a rich, reddish-brown hue and distinctive grain patterns, cherry adds warmth and elegance to any space. It’s incredibly durable and ages beautifully, but its cost tends to be on the higher end. Cherry is also susceptible to scratches and water damage, requiring more care.

Alternative Options:

  • Hickory: This North American hardwood boasts exceptional hardness and strength, making it ideal for busy households with pets or children. Hickory features a pronounced grain pattern with warm amber tones and can be stained darker for a richer look. However, its hardness can make it challenging to install and refinish.
  • Walnut: For a luxurious and sophisticated touch, walnut flooring is hard to beat. Its deep brown color, intricate grain patterns, and natural luster create a stunning visual impact. Walnut is incredibly durable but also expensive and prone to scratches.
  • Bamboo: A sustainable and eco-friendly option, bamboo flooring is known for its fast-growing nature and unique grain patterns. It’s relatively hard and scratch-resistant, making it suitable for moderate traffic areas. However, bamboo flooring can be susceptible to moisture damage and may not be as readily available as traditional hardwoods.

Hardwood Floor Refinishing Processes

1. Preparation:

  • Clear the room: Remove all furniture, rugs, and window treatments. Cover doorways and protect walls with plastic sheeting.
  • Remove baseboards and moldings: Carefully detach and label them for reinstallation later.
  • Address repairs: Fix any cracks, gaps, or missing wood pieces using appropriate fillers and techniques.
  • Deep clean: Thoroughly vacuum and mop the floor to remove dust, dirt, and debris.

2. Sanding:

  • Initial sanding: Use a coarse-grit sandpaper to remove the old finish, stains, and surface imperfections.
  • Corner and edge sanding: Employ special tools to reach tight spaces and ensure a smooth finish in corners and along edges.
  • Screen sanding: Refine the surface with finer grit sandpaper to create a smooth and even base for the new finish.
  • Vacuum and dust removal: Meticulously remove all sanding dust from the floor, walls, and surrounding areas.

3. Staining (Optional):

  • Apply wood conditioner (optional): This helps ensure even stain absorption and prevents blotching.
  • Choose and apply stain: Select a stain color that complements your desired aesthetic and apply it evenly using a brush, rag, or sprayer. Allow the stain to dry completely.
  • Neutralize the stain: Use a neutralizing solution to stop the staining process and prepare the surface for the finish.

4. Finishing:

  • Apply the first coat of finish: Choose a suitable finish type (oil-based, water-based, polyurethane) and apply a thin, even coat. Allow it to dry completely.
  • Sand lightly between coats: Use very fine sandpaper to smooth out any imperfections between coats.
  • Apply additional coats: Depending on the desired level of durability and sheen, apply 2-3 additional coats of finish, allowing each coat to dry completely before sanding and applying the next.

5. Final Touches:

  • Reinstall baseboards and moldings: Carefully reattach the baseboards and moldings using appropriate nails or adhesive.
  • Touch-up and cleaning: Address any minor imperfections with touch-up stain or finish. Clean the floor with a recommended cleaning solution.
  • Allow full curing: Wait for the recommended curing time before placing furniture and rugs back on the floor.

Urban Customs Installs Hardwood Flooring In Phoenix, Arizona

At Urban Customs we offer all types of flooring installation in Phoenix, Arizona, including Wood flooring, stone flooring, and bamboo flooring. Request a free flooring installation quote from Urban Customs today! Our address is 8050 N 19th Ave #127, Phoenix, AZ 85021.[/vc_column_text][/vc_column][/vc_row]

Cleaning Wood Floors
Written by Craig B

What Is Sustainable Flooring?

Sustainable flooring is flooring that is produced in an environmentally friendly way. This means that the materials used to make the flooring are renewable or recycled, and that the production process does not harm the environment.

There are many different types of sustainable flooring available, including:

  • Bamboo: Bamboo is a fast-growing grass that is harvested without the need for replanting. It is a strong and durable material that can be used for a variety of flooring applications.
    Bamboo flooring
  • Cork: Cork is a natural material that is made from the bark of the cork oak tree. It is a soft and resilient material that is resistant to water and mold.
    Cork flooring
  • Reclaimed wood: Reclaimed wood is wood that has been salvaged from old buildings or structures. It is a sustainable option because it reduces the demand for new wood.
    Reclaimed wood flooring
  • Natural stone: Natural stone, such as marble, granite, and travertine, is a durable and long-lasting material that can be used for flooring. It is a sustainable option because it is a natural material that does not require a lot of energy to produce.
    Natural stone flooring
  • LVT (Luxury vinyl tile): LVT is a type of flooring that is made from vinyl but has the look and feel of real wood or stone. It is a sustainable option because it is made from recycled materials and is easy to recycle.
    LVT (Luxury vinyl tile) flooring

When choosing sustainable flooring, it is important to consider the following factors:

  • The environmental impact of the materials used to make the flooring.
  • The energy used to produce the flooring.
  • The durability of the flooring.
  • The ease of maintenance and cleaning.

By choosing sustainable flooring, you can help to reduce your impact on the environment and create a more sustainable home.

Bamboo Flooring

Bamboo flooring is a type of flooring made from bamboo, a fast-growing grass. Bamboo is a sustainable material that can be harvested without the need for replanting. It is a strong and durable material that can be used for a variety of flooring applications.

There are two main types of bamboo flooring: solid bamboo flooring and engineered bamboo flooring:

Solid bamboo flooring is made from solid pieces of bamboo that are glued together. It is a more expensive option, but it is also the most durable.

Engineered bamboo flooring is made from bamboo strips that are glued together and then topped with a veneer. It is a less expensive option, but it is not as durable as solid bamboo flooring.

Here are some of the pros and cons of bamboo flooring:

Pros:

  • Sustainable and renewable material
  • Strong and durable
  • Easy to care for
  • Versatile and can be stained or finished to match any décor
  • Hypoallergenic

Cons:

  • Can be more expensive than other types of flooring
  • Not as durable as solid wood flooring
  • Can be susceptible to dents and scratches

Overall, bamboo flooring is a good choice for those who are looking for a sustainable, durable, and easy-to-care-for flooring option.

Here are some additional tips for choosing bamboo flooring:

  • Consider the traffic level in the area where the flooring will be installed. If the area will receive heavy traffic, choose a thicker and more durable grade of bamboo flooring.
  • Choose the right finish for your needs. If you have pets or children, choose a finish that is scratch-resistant.
  • Have the flooring professionally installed to ensure that it is installed correctly.

Cork Flooring

Cork flooring is a type of flooring made from the bark of the cork oak tree. It is a natural material that is soft, resilient, and water-resistant. Cork flooring is also a good insulator, which can help to keep your home cool in the summer and warm in the winter.

There are two main types of cork flooring: solid cork flooring and cork tiles.

Solid cork flooring is made from solid pieces of cork that are glued together. It is a more expensive option, but it is also the most durable.

Cork tiles are made from cork that is sliced into thin sheets and then glued to a backing material. They are a less expensive option, but they are not as durable as solid cork flooring.

Cork flooring is available in a variety of colors and finishes, so you can find the perfect look for your home. It is also relatively easy to care for, making it a good choice for busy families.

Here are some of the pros and cons of cork flooring:

Pros:

  • Sustainable and renewable material
  • Soft and comfortable underfoot
  • Water-resistant and easy to clean
  • Good insulator
  • Hypoallergenic and non-toxic

Cons:

  • Can be more expensive than other types of flooring
  • Not as durable as solid wood flooring
  • Can be susceptible to dents and scratches

Overall, cork flooring is a good choice for those who are looking for a sustainable, comfortable, and easy-to-care-for flooring option.

Here are some additional tips for choosing cork flooring:

  • Consider the traffic level in the area where the flooring will be installed. If the area will receive heavy traffic, choose a thicker and more durable grade of cork flooring.
  • Choose the right finish for your needs. If you have pets or children, choose a finish that is scratch-resistant.
  • Have the flooring professionally installed to ensure that it is installed correctly.

Reclaimed Wood Flooring

Reclaimed wood flooring is made from wood that has been salvaged from old buildings or structures. It is a sustainable option because it reduces the demand for new wood. Reclaimed wood can be used to create a unique and stylish look in your home.

There are many different types of reclaimed wood flooring available, including:

  • Hardwood: Hardwood reclaimed wood is made from hardwood trees, such as oak, maple, and walnut. It is a durable and long-lasting material that can be used for a variety of flooring applications.
  • Softwood: Softwood reclaimed wood is made from softwood trees, such as pine and fir. It is less durable than hardwood reclaimed wood, but it is also less expensive.
  • Tropical wood: Tropical wood reclaimed wood is made from trees that are native to tropical regions. It is a beautiful and exotic material, but it can be expensive.

Reclaimed wood flooring is available in a variety of colors and finishes, so you can find the perfect look for your home. It is also relatively easy to care for, making it a good choice for busy families.

Here are some of the pros and cons of reclaimed wood flooring:

Pros:

  • Sustainable and renewable material
  • Unique and stylish look
  • Durable and long-lasting
  • Easy to care for
  • Can be customized to match any décor

Cons:

  • Can be more expensive than other types of flooring
  • May contain defects, such as knots and cracks
  • May require special care and maintenance

Overall, reclaimed wood flooring is a good choice for those who are looking for a sustainable, unique, and stylish flooring option.

Here are some additional tips for choosing reclaimed wood flooring:

  • Consider the traffic level in the area where the flooring will be installed. If the area will receive heavy traffic, choose a thicker and more durable grade of reclaimed wood flooring.
  • Choose the right finish for your needs. If you have pets or children, choose a finish that is scratch-resistant.
  • Have the flooring professionally installed to ensure that it is installed correctly.

Natural Stone

Natural stone flooring is a type of flooring made from natural stone materials, such as marble, granite, travertine, and slate. It is a durable and long-lasting material that can be used for a variety of flooring applications.

Here are some of the most popular types of natural stone flooring:

  • Marble: Marble is a metamorphic rock that is known for its beautiful and varied colors. It is a durable and easy-to-clean material, but it can be susceptible to staining.
  • Granite: Granite is an igneous rock that is known for its strength and durability. It is a non-porous material that is resistant to stains and moisture.
  • Travertine: Travertine is a sedimentary rock that is known for its unique honeycomb pattern. It is a durable and easy-to-clean material, but it can be susceptible to etching.
  • Slate: Slate is a metamorphic rock that is known for its smooth and uniform finish. It is a durable and easy-to-clean material, but it can be slippery when wet.

Natural stone flooring is available in a variety of colors, textures, and finishes, so you can find the perfect look for your home. It is also relatively easy to care for, making it a good choice for busy families.

Here are some of the pros and cons of natural stone flooring:

Pros:

  • Durable and long-lasting
  • Easy to clean and maintain
  • Variety of colors, textures, and finishes
  • Can add value to your home

Cons:

  • Can be expensive
  • Can be slippery when wet
  • May require sealing to protect it from stains and moisture
  • Can be difficult to install

Overall, natural stone flooring is a good choice for those who are looking for a durable, elegant, and timeless flooring option.

Here are some additional tips for choosing natural stone flooring:

  • Consider the traffic level in the area where the flooring will be installed. If the area will receive heavy traffic, choose a harder and more durable type of stone.
  • Choose a stone that is compatible with the style of your home.
  • Have the flooring professionally installed to ensure that it is installed correctly.

Luxury Vinyl Tile Flooring

LVT is a type of flooring that is made from vinyl but has the look and feel of real wood or stone. It is a popular choice for its durability, affordability, and ease of installation.

LVT is made up of a few layers:

  • The top layer is a wear layer that protects the flooring from scratches and dents.
  • The middle layer is a core that provides strength and stability.
  • The bottom layer is a backing that provides insulation and moisture resistance.

LVT is available in a variety of colors, textures, and finishes, so you can find the perfect look for your home. It is also relatively easy to care for, making it a good choice for busy families.

Here are some of the pros and cons of LVT flooring:

Pros:

  • Durable and long-lasting
  • Affordable
  • Easy to install
  • Easy to care for
  • Variety of colors, textures, and finishes
  • Waterproof and resistant to stains
  • Can be used in wet areas

Cons:

  • Not as durable as natural stone or hardwood
  • Can be noisy when walked on
  • May not feel as “authentic” as natural materials

Overall, LVT flooring is a good choice for those who are looking for a durable, affordable, and easy-to-care-for flooring option.

Here are some additional tips for choosing LVT flooring:

  • Consider the traffic level in the area where the flooring will be installed. If the area will receive heavy traffic, choose a thicker and more durable grade of LVT flooring.
  • Choose a type of LVT flooring that is compatible with the style of your home.
  • Have the flooring professionally installed to ensure that it is installed correctly.

[/vc_column_text][/vc_column][/vc_row]

Urban Customs Installs Hardwood Flooring In Phoenix, Arizona

At Urban Customs we offer all types of flooring installation in Phoenix, Arizona, including Wood flooring, stone flooring, and bamboo flooring. Request a free flooring installation quote from Urban Customs today! Our address is 8050 N 19th Ave #127, Phoenix, AZ 85021.

Cleaning Wood Floors
Written by Craig B

DIY Wood Floors Cleaning

Wood floors are very popular in businesses and homes. Read on to learn more about keeping them looking great.

Sweep or Vacuum Daily

Sweep or vacuum daily to remove grit and crumbs that can cause scratches and wear down the finish of the floor. Don’t forget to clean under area rugs on a regular basis.

Tackle Messes as They Happen

Don’t allow any type of dry mess or wet spills that can leave water rings to remain for more than a few minutes on hardwood floors. This is especially important
for mud or any foods or liquids that are dark in color and can leave difficult-to-remove stains. After cleaning up the spill with a paper towel or cloth, give the floor a final “rinse” with a slightly water-dampened cloth or mop. Wipe in the direction of the wood grain to prevent streaking.

Dust And Mop Weekly

To capture the dust bunnies that seem to appear from nowhere, dust mop wood floors at least once per week.

Damp Mop Seasonally

If you have been taking care of messes promptly and keeping floors free of grit and dust, then you should only need to damp mop with a cleaning product a few times each year. NEVER use a sopping-wet mop. Excessive water can damage every sealant on wood floors and cause them to buckle. Lightly dampen a microfiber mop and always clean following the grain of the wood and allow the wood to dry completely before walking to prevent spotting. If you live in an area with hard water, damp mop with distilled water. The excessive minerals in hard water can leave the floor finishes looking dull. If you choose to use a commercial wood floor cleaner, choose one with a spray applicator or a mop that includes a refillable spray feature. Just a heavy mist of about one-half teaspoon per two square feet is adequate for cleaning. Too much product can leave floors sticky and actually attract more dirt.

Urban Customs Installs Hardwood Flooring In Phoenix, Arizona

At Urban Customs we offer all types of flooring installation in Phoenix, Arizona, including Wood flooring, stone flooring, and bamboo flooring. Request a free flooring installation quote from Urban Customs today! Our address is 8050 N 19th Ave #127, Phoenix, AZ 85021.

Refinishing Hardwood Floors Costs 2022
Written by Craig B

Refinishing Hardwood Floors Costs 2022

On average, it costs $1,669 for hardwood floor refinishing projects in the U.S. Prices will typically range from $1,072-$2,386, according to Homeadvisor.

Hardwood Floor Refinishing Costs

Typical hardwood floor refinishing will cost anywhere from $3$8 per square foot. Location, condition and accessibility of the flooring will undoubtedly affect the total cost of the project. Traditional refinishing methods, such as sanding, recoating and cleanup will run between $3$6 per square foot. A dustless method, using advanced commercial vacuums, will cost $5$8 per square foot on average.

Cost Factors

The overall cost can easily increase depending on the type of floors, the condition they are in and extra improvements. Any differences from standard or straightforward refinishing projects can add to the overall cost. Some of these differences include:

  • Refinishing or recoating
  • Total square footage of the floor
  • The floors condition
  • Quality of the coating or finishing
  • Number of finishes or coats needed
  • If there are stairs
  • Carpet or other flooring removals
  • Access

Hardwood Floor Refinishing Cost

Refinishing Hardwood Floors In The Home

For homeowners in the U.S., the average cost to refinish hardwood flooring is $3.75 per square foot, meaning most will spend between $3-$5 for the service. This will include having the floors sanded, stained and finished completely, according to homeguide.com. On average, a total cost for this service will range from $900-$2,110.

Here are few of the cost factors involved in refinishing a hardwood floor:

  • Tools and materials needed
  • Labor costs
  • Coatings

Professionals need a wide variety of tools to complete this job, including a drum sander, edger and buffer.  Receive a free hardwood floor refinishing quote by contacting the Urban Customs team today!

Hardwood Floor Refinishing Process

Screening the Floor – Also called buffing and typically costs around $1 to $2 per square foot, totaling $200 to $250 to buff a slightly worn room that is 15×15 feet, or 225 square feet.

Sanding the Wood – If the floor has a wax coating or has been damaged or stained it is going to need to be sanded by a professional.

Staining the Hardwood – If your hardwood is still in good condition, staining may not be necessary.

Finishing or Coating – There are two types of polyurethane coatings, water-based and oil-based. Water-based polyurethane runs about $40 per gallon, while an oil-based polyurethane is about $25 per gallon.

Urban Customs Installs Hardwood Flooring In Phoenix, Arizona

At Urban Customs we offer all types of flooring installation in Phoenix, Arizona, including Wood flooring, stone flooring, and bamboo flooring. Request a free flooring installation quote from Urban Customs today! Our address is 8050 N 19th Ave #127, Phoenix, AZ 85021.

Cleaning Wood Floors
Written by Craig B

Cleaning Wood Floors

Wood floors are very popular in businesses and homes. Read on to learn more about keeping them looking great.

Sweep or Vacuum Daily

Sweep or vacuum daily to remove grit and crumbs that can cause scratches and wear down the finish of the floor. Don’t forget to clean under area rugs on a regular basis.

Tackle Messes as They Happen

Don’t allow any type of dry mess or wet spills that can leave water rings to remain for more than a few minutes on hardwood floors. This is especially important
for mud or any foods or liquids that are dark in color and can leave difficult-to-remove stains. After cleaning up the spill with a paper towel or cloth, give the floor a final “rinse” with a slightly water-dampened cloth or mop. Wipe in the direction of the wood grain to prevent streaking.

Dust And Mop Weekly

To capture the dust bunnies that seem to appear from nowhere, dust mop wood floors at least once per week.

Damp Mop Seasonally

If you have been taking care of messes promptly and keeping floors free of grit and dust, then you should only need to damp mop with a cleaning product a few times each year. NEVER use a sopping-wet mop. Excessive water can damage every sealant on wood floors and cause them to buckle. Lightly dampen a microfiber mop and always clean following the grain of the wood and allow the wood to dry completely before walking to prevent spotting. If you live in an area with hard water, damp mop with distilled water. The excessive minerals in hard water can leave the floor finishes looking dull. If you choose to use a commercial wood floor cleaner, choose one with a spray applicator or a mop that includes a refillable spray feature. Just a heavy mist of about one-half teaspoon per two square feet is adequate for cleaning. Too much product can leave floors sticky and actually attract more dirt.

Urban Customs Installs Hardwood Flooring In Phoenix, Arizona

At Urban Customs we offer all types of flooring installation in Phoenix, Arizona, including Wood flooring, stone flooring, and bamboo flooring. Request a free flooring installation quote from Urban Customs today! Our address is 8050 N 19th Ave #127, Phoenix, AZ 85021.

Refinishing Hardwood Floors Costs 2022
Written by Brian B

How Much Does It Cost To Refinish Hardwood Floors?

On average, it costs $1,669 for hardwood floor refinishing projects in the U.S. Prices will typically range from $1,072-$2,386, according to Homeadvisor.

Hardwood Floor Refinishing Costs

Typical hardwood floor refinishing will cost anywhere from $3$8 per square foot. Location, condition and accessibility of the flooring will undoubtedly affect the total cost of the project. Traditional refinishing methods, such as sanding, recoating and cleanup will run between $3$6 per square foot. A dustless method, using advanced commercial vacuums, will cost $5$8 per square foot on average.

Cost Factors

The overall cost can easily increase depending on the type of floors, the condition they are in and extra improvements. Any differences from standard or straightforward refinishing projects can add to the overall cost. Some of these differences include:

  • Refinishing or recoating
  • Total square footage of the floor
  • The floors condition
  • Quality of the coating or finishing
  • Number of finishes or coats needed
  • If there are stairs
  • Carpet or other flooring removals
  • Access

Hardwood Floor Refinishing Cost

Refinishing Hardwood Floors In The Home

For homeowners in the U.S., the average cost to refinish hardwood flooring is $3.75 per square foot, meaning most will spend between $3-$5 for the service. This will include having the floors sanded, stained and finished completely, according to homeguide.com. On average, a total cost for this service will range from $900-$2,110.

Here are few of the cost factors involved in refinishing a hardwood floor:

  • Tools and materials needed
  • Labor costs
  • Coatings

Professionals need a wide variety of tools to complete this job, including a drum sander, edger and buffer.  Receive a free hardwood floor refinishing quote by contacting the Urban Customs team today!

Hardwood Floor Refinishing Process

Screening the Floor – Also called buffing and typically costs around $1 to $2 per square foot, totaling $200 to $250 to buff a slightly worn room that is 15×15 feet, or 225 square feet.

Sanding the Wood – If the floor has a wax coating or has been damaged or stained it is going to need to be sanded by a professional.

Staining the Hardwood – If your hardwood is still in good condition, staining may not be necessary.

Finishing or Coating – There are two types of polyurethane coatings, water-based and oil-based. Water-based polyurethane runs about $40 per gallon, while an oil-based polyurethane is about $25 per gallon.

Urban Customs Installs Hardwood Flooring In Phoenix, Arizona

At Urban Customs we offer all types of flooring installation in Phoenix, Arizona, including Wood flooring, stone flooring, and bamboo flooring. Request a free flooring installation quote from Urban Customs today! Our address is 8050 N 19th Ave #127, Phoenix, AZ 85021.